Foundry and metalworking · 2026

Ferokast: ERP for a foundry, machining shop and welding shop

ERP for a manufacturer of made-to-drawing metal components: quotes based on routing standards, heats with chemical analysis against the grade, machining with a measurement report, welding to WPS, quality control, traceability back to the heat and charge materials, and a 3.1 certificate to EN 10204.

Saitami.bg built Ferokast: ERP for a foundry, machining shop and welding shop as an industry solution for Foundry and metalworking in 2026. Live at demo.mmm.software.

Ferokast: ERP for a foundry, machining shop and welding shop

One order from inquiry to dispatch

This is how the demo scenario works. You can also complete every step yourself, using the role responsible for it on the shop floor.

  1. 01

    Inquiry and quote

    The customer sends a drawing for 4 gearbox housings made from G20Mn5. The quote is calculated from the routing: metal, energy, moulding, shop-floor hours and overheads, with a margin you choose.

  2. 02

    Order and plan

    The customer accepts the quote in the portal, and it becomes an order routed through the foundry, machining shop and welding shop. Planning shows the load on every machine by week.

  3. 03

    Heat

    The melting operator loads charge materials from certified batches. The first sample shows manganese below grade, the system says how much ferromanganese to add, and the second sample is within grade.

  4. 04

    Castings

    Four of the five castings are acceptable, while one with gas porosity is scrapped with a reason. The nonconformity opens automatically.

  5. 05

    Machining

    The boring machine operator starts the operation from the phone and records good parts and scrap. The dimensions from the drawing are entered in a measurement report.

  6. 06

    Welding and inspection

    The lugs are welded to WPS by a welder with a valid qualification, while visual and magnetic particle testing are recorded against each component.

  7. 07

    Certificate and dispatch

    Quality control issues a 3.1 certificate with the chemical composition and mechanical properties from the heat, the component numbers and the report. Dispatch cannot proceed without it.

  8. 08

    Cost

    The manager sees the quote versus actual cost by line item: metal, energy and shop-floor hours.

Screens

Inquiry with the drawing and the quote calculation based on the standards.
Load by machine and week, showing what is delayed and why.
Heat under analysis: manganese is below grade, and the system calculates the adjustment.
Order routed through the three shops, with stages and operations.
Visual and non-destructive testing of welds.
Traceability of one component back to the heat and the batches in the charge materials.
3.1 certificate to EN 10204 based on the heat data.
Order cost: quoted versus actual by line item.
Machine downtime, planned maintenance and availability.
The manager's dashboard.

In the workshop and at the customer's site

Workers and customers work from their phones, with no installation required.

The milling operator's tasks: start, pause, good parts and scrap, drawing.
The milling operator's tasks: start, pause, good parts and scrap, drawing.
The melter sees the heat and the correction to make.
The melter sees the heat and the correction to make.
The customer sees their orders, deadlines and documents.
The customer sees their orders, deadlines and documents.

What is illustrative

The company Ferokast, the customers, people and figures in the demo are fictional. The steel, cast iron and bronze grades, standards and work steps are true to those used in a foundry with machining and welding workshops. Your workshop's system is built around your machines, grades, standards and documents.

About the project

Ferokast is an industrial solution for a company that casts, machines and welds made-to-drawing metal components. The company in the solution is fictional, and the data is illustrative: 28 orders, 21 heats, six customers, and 17 machines and workstations across the foundry, machining and welding shops and quality control.

An inquiry becomes a quote calculated from the routing and standards: metal including the gating system, melting energy, moulding materials, shop-floor hours and manufacturing overheads, with a margin you choose. The accepted quote becomes an order, while planning shows the load on every machine by week and why each delayed order is running late.

In the foundry, the heat moves from planning through charge materials, melting and sampling. The spectrochemical analysis is compared with the grade, and when an element falls outside it, the system calculates how much ferroalloy to add. Castings receive serial numbers, scrap is recorded with a reason, and metal yield is calculated from the heat.

The machining shop records setup and machine time for each operation, along with a measurement report against the drawing. The welding shop works to WPS, with welder qualifications and visual and non-destructive testing. Quality control issues a 3.1 certificate to EN 10204 from the heat data, and every component can be traced back to the heat and the batches in the charge materials.

Actual cost is compared with the quote by line item while the order is on the shop floor. The worker sees their tasks on their phone, while the customer has a portal with orders, deadlines and documents. The demo opens without registration, and a 20-step scenario takes one order from inquiry to dispatch.

Screens

Project questions

Who built Ferokast: ERP for a foundry, machining shop and welding shop?
Saitami.bg built Ferokast: ERP for a foundry, machining shop and welding shop as an industry solution for Foundry and metalworking in 2026. Live at demo.mmm.software. ERP for a manufacturer of made-to-drawing metal components: quotes based on routing standards, heats with chemical analysis against the grade, machining with a measurement report, welding to WPS, quality control, traceability back to the heat and charge materials, and a 3.1 certificate to EN 10204.
What does Ferokast: ERP for a foundry, machining shop and welding shop include?
Quote based on routing and standards, with margin, Heats: charge materials, chemical analysis against the grade, adjustment and pouring, Castings with serial numbers, scrap with reasons, metal yield, Machining with machine time and measurement report, Welding to WPS, welder qualifications, VT and NDT, Quality control, nonconformities and a 3.1 certificate to EN 10204, Traceability from the component back to the heat and charge materials, Load by machine and week, with the reason for every delay, Cost: quote versus actual, Shop-floor terminal on the phone and customer portal.
How much does a project like this cost?
Similar work with us costs €3,000-€29,300. Prices are ranges based on 98 of our quotes as of 14 August 2026; the exact price of a project is given in its quote.
Can you build the same thing for my company?
Yes. You tell us how your company works, we come back with questions and a price range, then a demo and a written quote. Phone +359 2 423 4955, email [email protected].
Custom Software Development

More Projects

Distribution of power supplies and LED components · 2026

OMEGA LIGHT - MEAN WELL catalogue system with parametric search

Software system for the catalogue of MEAN WELL’s official distributor in Bulgaria (meanwell.bg): over 3 700 power supplies with 61 technical parameters, typo-tolerant search, filters, a one-page configurator, comparison, price tiers for business customers, quotation requests without registration, and SEO migration from the old site without losing URLs.

Next.js 16React 19TypeScript
Pelikan DTM, an ERP system for inventory, checkout, documents and an online store
Office equipment distribution · 2026

Pelikan DTM, an ERP system for inventory, checkout, documents and an online store

A custom-built system that handles the entire day-to-day operation of an office equipment distributor: two locations and 2 818 items, a checkout with a fiscal device through the browser, deliveries, invoices and credit notes in PDF, stocktakes, business customers with wholesale prices, and the entire online store, from products to the Speedy waybill. Built as part of a project co-financed by the European Union.

Next.js 16React 19TypeScript

What do you want us to build?

You describe the project, we come back with questions and a price range, then a demo and a written proposal.

Clients we have worked with

  • Akbari Perfume House
  • Ministry of Innovation and Growth
  • Crypto.bg
  • LiftexPro
  • Pelikan DTM
  • FIX Bulgaria
  • Vakarel
  • MysteryBet
  • Dobrite Hamali
  • Omega Light
  • Deyan Stoev Photography
  • MyUnite
  • AGA Transfer
  • KMP Build
  • Eko Taxi
  • modernoBG
  • KingsTeam
  • Vida Luxe
  • Avanta
  • Q-Parts.bg
  • Lichtgitter Bulgaria
  • Pintor
  • Baytown Machinery
  • Labimex
  • National Elevator Company
  • Christian Center Sofia
  • FastPool.bg
  • ZapaziChas
  • UnitGold
  • GP Invest
  • Unit.Estate
  • Elite Call Center
  • Volt Party Show
  • Camélia Désir
  • Videoto
  • Pro Structura
  • FILAUTO